Attention! New dripnose bead models: BP14 PLUS N – new bead with protective tape and BP14 LUX N – new concealed bead. The beads allow for finishing the lower edge of the façade in a very precise manner with minimal plastering, thus reducing costs.

Functional properties:

– Draining water away from the surface of the façade

– Strengthening plus straight and aesthetic finish of the lower edges of the façade

– Easy, fast installation

Installation: the dripnose bead should be installed in places where it is required to drain water away from the surface of the façade, such as under the terrace, balcony, cornice, above the window and other places where water flowing down the façade can penetrate under the outwardly projecting parts of the façade. For proper installation, sink the fibreglass mesh which the dripnose bead features in the adhesive intended for the installation of fibreglass mesh on foamed polystyrene or glass wool. The adhesive should be spread over the surface of the foamed polystyrene or wool using a special trowel, making sure to distribute it uniformly. Then sink the dripnose bead’s fibreglass mesh into the adhesive and then immediately cover this façade system’s mesh with the fibreglass mesh with an overlap of 10 cm. This operation should be carried out in one step, so that in result both fibreglass meshes (mesh from dripnose bead and the façade system’s mesh) are embedded in the adhesive forming a single layer (structure).

After the adhesive has dried, you can start plastering. The plaster should be evenly distributed in order to fill the whole area in the dripnose bead intended for plaster.

Pricing policy: Bella Plast maintains a transparent pricing policy, which is an important factor in the successful distribution of Bella Plast products. Each customer will receive a competitive price that is appropriate to the volume of purchase and position in the distribution market. The price-quantity-quality relationship is our primary measure in building the distribution network, determining the correct resale price and increasing the availability of goods.

 

BP14 LUX N CONCEALED PVC DRIPNOSE BEAD WITH MESH
Name	length (mm)	no. of pieces / bulk package
BP14 LUX N L200	2000	25
BP14 LUX N L250	2500	25
BP14 LUX N L300	3000	25

*- ask for custom lengths

It is recommended to use the BP14 LUX COK dripnose bead for the aluminium starter strips. The BP14 LUX COK bead should be glued down from the bottom to the aluminium starter strip using a special foam adhesive tape that is included on the BP14 LUX COK bead. Then, glue the fibreglass mesh mounted on the BP14 LUX COK bead to the surface of the thermal cladding with glue for embedding the fibreglass mesh into the insulated render, overlapping the mesh by 10cm with the façade fibreglass mesh and draw both meshes with adhesive. The BP14 LUX COK bead provides a very aesthetic, even finish of the lower part of the façade in the form of a solid PVC dripnose bead and, above all, eliminates frequent plaster breaking at the edge of the aluminium starter strip and structural plaster.

BP30 aluminium starter strips BP30 ALU Starter strips