Cross profiles (connectors) for groove beads are an addition to the offer of groove bead products
Use: For making cross connections of groove beads at an angle of 90 degrees in the insulation façade.
Functional properties:
– The use of cross profiles does not require any additional working of the groove beads connected to the cross profile – except for cutting them to the desired length.
– The groove beads are connected to the cross profile with a butt joint – exactly the same as the longitudinal connection of two successive groove beads.
– Cross profiles increase the technical advantages of cross connections of groove beads and the aesthetics of such joints.
– Cross profiles guarantee a tight cross connection of groove beads. Additionally – this is not obligatory – longitudinal connectors for groove beads can be used that connect the cross profile with groove beads.
Assembly: Cross profiles for groove beads should be assembled in the same way as groove beads. A groove must be made in the thermal cladding, correspondingly larger than the dimension of the groove bead used. Next, insert glue to embed the fibreglass mesh into the groove and insert the cross profile inside it. The glue should be located under the whole element. Perforated wings of the cross profile and the groove bead itself should be covered with the façade fibreglass mesh from the top (lapped). In the case of groove beads in a version with the fibreglass mesh, for example BP11 H2S, the façade fibreglass mesh should „overlap” the fibreglass mesh strips (which the groove bead with the mesh features) and the perforated wings of the cross profile from the top.
ATTENTION:
Cross profiles (connectors) for groove beads are approved for use in construction in the form of the National Technical Assessment ITB-KOT-2017/0249 issued by the Institute of Building Technology in Warsaw. The National Technical Assessment was issued for cross profiles only with the use of groove beads made by Bella Plast. The use of groove beads from manufacturers other than Bella Plast is inconsistent with the National Technical Assessment and results in the loss of the manufacturer’s warranty.
Cross profiles (connectors) for groove beads – examples of use
| |||||||||||||||||||||||||||||||||||||
| INTENDED USE OF BP11 CC PROFILES | |
Name | Intended use |
BP11 MINI MAX CC | BP11 MINI MAX S |
BP11H1 CC | BP11 H1, BP11 H1S |
BP11H2 CC | BP11 H2R, BP11 H2RS, BP11 H2N, BP11 H2NS |
BP11H3 CC | BP11 H3R, BP11 H3RS |
BP11 H1 CC – cross connector for boni BP11 H1 and BP11 H1 S – (10mm / 10mm)
BP11H2 CC – connection with BP11H2R and BP11H2RS groove beads – see more
ATTENTION: cross profiles and groove beads are made in white colour and are intended for being painted. The manufacturer allows the lack of repeatability of white colour in both the colour of cross profiles and groove beads. Differences in the white colour between the colour of the cross profile and groove bead does not constitute grounds for complaints due to the lack of colour repeatability.