Cross profiles (connectors) for rustication profiles are offered as an addition to the range of rustication profiles.
T-shape profiles expand the offer of accessories for joining rustication profiles, see also BP11 HCC cross connectors.
APPLICATION:
„T”-shape connections of rustication strips in the insulation facade.
FUNCTIONAL PROPERTIES:
- „T” connectors can be used with no additional treatment of rustication profiles other than simply trimming the profiles to the appropriate length
- the connection between rustication profiles and “T” connectors is a butt joint connection – same as the longitudinal connection of two adjacent groove beads
- “T” profiles improve the technical properties of “T”-shape connections for groove beads and enhance the aesthetics of such joints
- „T” profiles ensure a tight “T”-shape connection of groove beads. It is also possible – however not required – to use longitudinal connectors for groove beads to connect the “T” profile with the groove beads.
INSTALLATION:
Installation of “T” profiles for groove beads is similar to installation of groove beads. A groove must be prepared in the thermal insulation cladding, the width of which is appropriately larger than the groove bead used. Then the groove is filled with an adhesive for fibreglass mesh and the “T” profile is inserted to the groove. Spread the adhesive under the entire surface of the profile. Cover the perforated wings of the “T” profile and the groove bead with facade fibreglass mesh, allowing for some overlap. In case of groove profiles with fibreglass mesh, such as BP11 H2RS, the facade fibreglass mesh must overlap the fibreglass mesh of the groove bead as well as the perforated wings of the “T” profile.
PLEASE NOTE:
“T” profiles (connectors) for groove beads are approved for use in construction based on the National Technical Assessment No. ITB-KOT-2017/0249 (extension) issued by the Building Research Institute in Warsaw. The National Technical Assessment was issued for “T” profiles only with the use of groove beads manufactured by Bella Plast. The use of groove beads from manufacturers other than Bella Plast is inconsistent with the National Technical Assessment and results in the loss of manufacturer’s guarantee.
| |||||||||||||||||||||||||||||||||||||
| INTENDED USE OF BP11 TC PROFILES | |
“T” connector name | intended use: type (designation) of groove bead featuring dimensions matching the dimensions of “T” connector |
BP11 MINI MAX TC | BP11 MINI S |
BP11H1 TC | BP11 H1, BP11 H1S |
BP11H2 TC | BP11 H2R, BP11 H2RS, BP11 H2N, BP11 H2NS |
BP11H3 TC | BP11 H3R, BP11 H3RS |
BP11 MINI MAX TC – connector T
BP11 H1 TC – connector T
BP11 H2 TC – connector T
“NOTE: ”T” connector profiles and groove beads are available in white technical colour and are intended for painting. The manufacturer reserves the lack repeatability of the white technical colour both on cross profiles as well as on groove beads. The discrepancies between the white technical colour of ”T” connector profiles and groove beads may not be invoked as the reason for colour non-repeatability complaint.”